Most shark rods are custom ordered and you can't always bend the blank/rod before purchase. Its not like you can try the rod out by borrowing the same model from your buddy. I looked through hundreds of post to get a feel for specific blanks and I thought it may help us to post photos of any blanks/rods you have under drag with model number and specifics of the blank. I hope these photos can be used as a resources in the future. Post the best photo and provide as much detail as possible.
Choas Shark Rod 10ft 80-130lb- cut down to 9ft with an 80w
6ft rod with unibutt with a 50w - 60lb to 100lb on a 8ft6in bull
6ft 3in super seeker 3x 80-130lb with a 50w on a 9ft 9in hammer
7ft Blackfin TA496XH with a 4/0 on a foul hooked blacktip
9ft Calstar gf900h - 30to 80lb on a Blacktip with a Van Staal 250
Penn Tuna Stick - 6ft on a 9ft 5 inch hammer with Penn 12/0
Same rod on a Lemon (over 8ft) with a Penn 9/0
Harnell 553 9ft on a Hammer with an 80W
TEAM GETCHA GETCHA SHARKON